Flapper Gate 

  • Ideal for entrance of companies, event venues, supermarkets, hospitals, etc.

  • We handle special order of Flapper Gate

  • 20 people can pass the gate in a minute

  • Weight is only 70kg

  • Low cost type available

Specification

ModelFlapper Gate (FW-GATE)
Passing SpecsProcessing capacity30 people/min (continuous passing), Or 20 people/min (one-by-one passing)
Note: specifications may differ depending on (upper limit) speed of the passer
Detection contentNormal Passage, Irregular Passage (jointly, etc), No Passage, Reverse Entry
Passage detection4 passage detectors are installed in an aisle.
Passing directionOne way ・ Both ways
Passing ConditionRemote ControlInterval operation may be controlled from distance using the remote control box.
Fire AlarmThe gate can be kept open by the emergency signal.
External DimensionDimension1,000×1,000×180mm
Aisle width900mm (For wheelchair use) ・ 550mm (For human passing)
WeightMain gate 70 kg、Sub-gate 60 kg
Power SupplyAC 100V±10%Input AC 100V(50~60Hz)、Internal system power supply DC 12V (Control power DC 5V)
Power ConsumptionDouble GateMax. 150W, below 50W when inactive (no passing)
Single GateMax. 100W, below 50W when inactive (no passing)
Operating environment conditionsInstallationIndoor, flat floor
Operating temperature0℃ ~ +40℃
Operating humidity30% ~ 90%RH, No condensation

CPD-J Human sensor

  • Sensor is installed under the table to detect the presence of human for occupancy management purpose

  • Human sensor can accurately detect both single seat and double seats, which are difficult to detect with passive sensor

  • The newly developed passive thermal sensing method enables continuous detection of motionless people.

Specification

ModelCPD-J
Operating・Installation locationIndoor・Under table (for example)
Detection typePassive thermal sensing
Detection distance0.1 ~ 0.8m
Power supply1 Lithium battery CR123A (required・sold seperately)
Battery lifeApproximately 5 years (room temperature, installed when deliver)
※Battery life may be shortened depending on the transmission interval and the usage environment
FrequencyEnOcean signal 928.38 MHz (EEP A5-07-01)
RF transmission distanceApproximately 25m (Open space) ※Transmission distance may vary depending on the installation environment.

CPI-J Human sensor

  • Wireless occupancy detection sensor

  • Layout free wireless

  • Waterproof for outdoor use

  • Hybrid power supply, maintenance-free

Specification

ModelCPI-J
Installation locationCeiling (indoor・outdoor)
Structure protectionIPX5
Operating Temperature Range-10~50℃
Power supplyHybrid power (solar battery + Lithium battery (sold seperately))
Battery lifeApproximately 10 years (at 25℃)
※Battery life may be shortened depending on the transmission interval and the usage outside the room temperature range
FrequencyEnOcean signal 928.38 MHz (EEP A5-07-01)
RF transmission distanceApproximately 25m (Open space) ※Transmission distance may vary depending on the installation environment.
SensorPassive infrared detection method
Installation hight 2.0 ~ 3.0m
Detection area 6 m in diameter

Contact Us -Contact us-

Contact Us Here